Skip to content
FilamentSelect
Shortlist

Approximate screen color · source authority unverified

Treat this hex as approximate until it is checked against a physical sample.

Bambu Lab

Blue

PA6-GF · Nylon

Find colors like this
Color values and print settings
Hex
#75AED8
RGB
117, 174, 216
HSL
205°, 56%, 65%
CIELAB
68.76, -7.42, -27.01
Diameter
1.75 mm
Nozzle
260–280 °C
Bed
80–100 °C

Printing this material

  • Abrasive — Contains fibre, mineral or metal filler that wears brass nozzles quickly. A hardened or ruby nozzle lasts; a stock brass one may not survive a spool.
  • Enclosure recommended — Shrinks enough while cooling that draughts cause warping and split layers. An enclosure, or simply a still room, makes the difference.
  • Keep dry — Absorbs moisture from the air, which prints as stringing, popping and weak layers. Filament that has sat out usually needs drying before use.

True of Nylon generally. Follow Bambu Lab’s own guidance for this spool.

Where to buy

This purchase link is an affiliate link, so Filament Select may earn a commission at no extra cost to you. As an Amazon Associate, Filament Select earns from qualifying purchases. Ranking is determined by color difference alone and is never influenced by commission. Full disclosure.

  • 3DE

    Europe · 1 kg · in stock

    DKK 528.00

    DKK 528.00/kg

    Checked

    Buy

  • LAB3D Store

    Europe · 1 kg · out of stock

    DKK 545.00

    DKK 545.00/kg

    Checked

    Check availability

Amazon

Searches Amazon for Bambu Lab Blue. This colour has not been matched to a listing.

Find on Amazon (affiliate link)

Closest alternatives from other spools

Ranked by how close each one looks to #75AED8, measured perceptually. Useful when this color is out of stock or you print in a different material.

Other colors in PA6-GF

See everything close to #75AED8 →